Hairy Woodpeckers use this nest box.
Suitable Nestbox Size: ~ 14 " inches tall. No perches at the entrance holes as they would aid predators. Stuffing the nestbox about half full with wood chips will discourage other birds seeking out nesting opportunities, plus the process of escavating cavities encourages nesting behaviors in woodpeckers.
Floor Dimensions: about 6" x 6"
Material to be used: Red Cedar (more durable than other wood material), rough cut boards or exterior-grade plywood at least 1/2" thick. Unpainted. Ventilation openings in the floor and under the roof. Although some experts disagree with the notion that ventilation openings are needed at all. Please refer to this article for further information. This may also depend on location of nest box, exposure to direct sun as well as material used to build the nest box.
Entrance Hole: About 1.7 in diameter to keep the larger birds out, about 11 inches above the floor.
Roof: Hinged, secured with shutter hooks. Sloped down, overlapping on the sides and the front reduces exposure to rain and makes it more difficult for predators to get to the chicks or eggs.
Hardware: Best to use corrosion resistant, stainless steel and dichromate plated screws
Predator Guard: An inverted metal cone attached below the nextbox will provide some protection against predators.
Affix nest box to posts with partial sun and shade, 12 feet or higher above the ground. The entrance hole in particular should be protected from the elements as much as possible.
Suitable areas would be along forest edges, in parks or gardens with trees - with easy access to water.
Position nest far enough from roads, paths or trails to minimize disturbance.
Take nest box down after each breeding season, and repair and sanitize before reusing.
Please Note: The articles or images on this page are the sole property of the authors or photographers. Please contact them directly with respect to any copyright or licensing questions. Thank you.
BeautyOfBirds strives to maintain accurate and up-to-date information; however, mistakes do happen. If you would like to correct or update any of the information, please send us an e-mail. THANK YOU!